Punching machine technical parameters

1. The main parameters

 

project

standard

Note

Punching speed

About once every 3 seconds

Depends on operator efficiency

Blanking standard efficiency

90 punches per minute for maximum sports

 

Mold wear rate

About 50,000 cuts

Depends on proper maintenance and correct installation and commissioning methods (trimming can be performed after wear)

Mold replacement efficiency

Completed in about 10 minutes

 

Infrared safety sensor

10 ms response time

When within the work area. Hand or foreign object penetrates, from the time of sensing infrared to power off. When the mold is lowered, it will not be lowered and will return to the original position after being detected by foreign objects. To ensure absolute security.

Mold material

SKD-11

 

Operation method

Touch screen interface editing program, the device completes automatically.

 

Use of electricity

AC220V / 50 60HZ

 

Power consumption

350W approx

 

Use of air source

0.6-0.8MPa clean and stable gas source

 

Pressure driven

Pneumatic, driving hydraulic pressure. The stroke range of 5 tons pressure is 10MM

 

Mold stroke

100MM. The stroke range of 5 tons is 10MM